Cart 0

Lubing The Shaft On Taylor Soft Serve And Frozen Beverage Machines

Posted by Slices Concession on

taylor soft serve frozen beverage machine shaft

 Whether you are cleaning your taylor machine or you're about to put it back together, it is recommended that you lubricate the drive shaft & apply lube to the drive shaft. When doing this, avoid applying lube to the hexagon shaped end of the shaft.

When done properly, you protect the mix from leaking into the wires & inner workings of the machine as well as allowing the beater frame to spin without any clogging or friction. 

* Lubricate all of the O rings on the machine

*If any product leaks through a boot seal that has been lubricated properly, have a technician check it for any damages or stretches. If so, it could mean that you need to replace the seal with a new one.

For more information on how to care for your machine check out manuals for more information on each brand/machine or please call us at 352-262-9627 for any repairs, new machines, or other equipment.


Share this post

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published.