Menu
Cart 0

2008 Taylor 444 3 Phase Air Cooled | Serial K8117218 | Milkshake, Smoothie, Frozen Beverage Machine

  • $ 7,00000





2011 Taylor 444 - Milkshake, Smoothie, Frozen Beverage Machine

Serial K8117218

Three-Phase Air Cooled

The Taylor 444 is a high-volume two-flavor frozen beverage smoothie/shake machine. This machine is in good condition, inside and out. Our in-house technicians have thoroughly inspected and made all necessary repairs to ensure top-notch performance. The barrel freezes, and the hopper refrigerates as it should.

You can find more information on this particular model; please review here. For questions regarding this machine or any others, don't hesitate to call us at (352)-888-1107 or email us at hello@slicesconcession.com.

PAYMENT

We accept ACH, Wire Transfers, and Credit (3% credit card fee) - Financing is offered through a partnered third-party provider.

To ensure your machine arrives in the same condition it leaves a mandatory $225 Crating Fee is required.

WARRANTY

All machines come with a 30-day parts and labor warranty and our lifetime phone support.

Please check our Policies Page for more details on warranty and shipping.


Freezing Cylinder

Two, 7 quart (6.6 liter).

Refrigerated Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC).

Indicator Lights

Add Mix light alerts the operator to add mix.

Solid State Controls

Thermistor control precisely monitors temperature and maintains consistent quality in product texture through solid-state technology.

Electrical

Two dedicated electrical connections are required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.

Beater Motor

Two, 1.0 HP Refrigeration System Two, 11,000 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections underside of base 1/2” FPT


We Also Recommend