Serial M3044909 

Single Phase Air Cooled

This Taylor 339 is in good condition both inside and out. The Barrel freezes, and the hopper refrigerates well. Our in-house technicians have inspected both exterior and interior components, and all necessary repairs have been done to the machine. For more information on this model: https://slicesconcession.com/pages/taylor-339

For questions regarding this machine or any others, don't hesitate to call us at 352-888-1107 or email us at hello@slicesconcession.com.

PAYMENT:

We accept ACH, Wire Transfers, and Credit (3% credit card fee) . We also have financing available through our partnered third-party partners.

Crating Fee: To ensure your machine arrives in the same condition it leaves a mandatory $225 Crating Fee is required.

Shipping is paid separately directly to our shipper and coordinated at the time of shipment. Please contact us for shipping estimates.

WARRANTY: 

All machines come with a 30-day parts and labor warranty and one phone support. Please see our Policies Page for more details on warranty and shipping.

FEATURES

FREEZING CYLINDER

FREEZING CYLINDER

Two, 2.8 quart (3.2 liter). 

MIX HOPPER

Two, 20 quart (13.2 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

INDICATOR LIGHTS

Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low.

STANDBY

During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

ElectricalTwo dedicated electrical connections are required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor
Two, 1.0 HP

Refrigeration System
Two, 6,000 BTU/hr. R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)

Air Cooled
Minimum 3” (76 mm) around all sides. Install the deflector to prevent
recirculation of warm air. Minimum air clearances must be met to assure
adequate air flow for optimum performance.

If you need more Taylor 339 machine info, please check out our Machine Support Page and Youtube Machine Tutorials.

Find more information on the Taylor 339 here.