Cart 0

2019 Taylor C002 | Serial M9086035 1 Phase Water Cooled | Continuous Custard, Ice Cream, Sorbet Machine

  • $ 19,99500
  • Save $ 40,005

2019 Taylor C002 Continuous Custard Machine

Serial M9086035

Single Phase, Water Cooled

The Taylor C002 is a continuous batch freezer that can dispense two flavors of frozen custard, ice cream, or sorbetIt has two high-capacity hoppers and indicator lights for easy operation.

This Taylor C002 machine is in good condition, inside and out. Our in-house technicians have thoroughly inspected and made all necessary repairs to ensure top-notch performance. The barrel freezes, and the hopper refrigerates as it should.

You can find more information on this particular model; please review here.

For questions regarding this machine or any others, don't hesitate to call us at 352-888-1107 or email us at


We accept ACH, Wire Transfers, and Credit (3% credit card fee) . We also have financing available through our partnered third-party partners.

Crating Fee: To ensure your machine arrives in the same condition it leaves a mandatory $225 Crating Fee is required.

Shipping is paid separately directly to our shipper and coordinated at the time of shipment. Please contact us for shipping estimates.


All machines come with a 30-day parts and labor warranty and lifetime phone support. Please see our Policies Page for more details on warranty and shipping.


Offer premium frozen custard, low overrun ice cream, or

Mix Hopper
Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR)
maintains mix below 41ºF (5ºC).

Indicator Lights
In order from top to bottom, separate lights indicate when mix is
low, refrigeration on, pre-chill mode, and scraping/ejection motor

Product Chute
Ribbon of frozen product flows down chute to separate dipping
cabinet. Easily removable for cleaning or moving dipping cabinet.

Mix Flow Regulator
Easy to read markings allow operator to dial in the correct amount
of mix flowing into freezing cylinder for proper consistency. Adjusts
for operation from the front, back, or side, depending on space

Two dedicated electrical connections are required. See the Electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord and receptacle
specifications as local codes allow.

Scraping/Ejection Motor
Two, 2.0 HP.

Refrigeration System
Two (2) 7,100 BTU/Hr. R-449A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)

Water Cooled
Water inlet and drain connections under side of base 1/2” FPT.

• Dipping Cabinet - request availablility

For more machine info, please check out our Machine Support Page and Youtube Machine Tutorials.

We Also Recommend