2010 TAYLOR 702 SERIAL M0122422 1PH AIR
Single Phase Air Cooled
Note: Machine is in good condition. Taylor 702 is in good condition both inside and out. Barrel freezes and hopper refrigerates well. Our in house technicians have inspected both exterior and interior components and all necessary repairs have been done to the machine. If you have any questions about this machine in particular or have a particular machine you are looking for feel free to call us at 352-262-9627. We also purchase and accept trade-ins and please call anytime for references as well.
2.5% discount on all purchases paid via wire transfer, cashier's check, or cash.
Payment by credit card is subject to additional paperwork. There will be a four day hold on all credit card and cashier's check purchases.
Crating will be $125 and is mandatory. You will pay shipper directly for commercial freight. Please call 352-262-9627 for freight estimates.
Please check our Policies Page for more info on warranty and shipping.
Two, 2.8 quart (2.7 liter).
Two, 14 quart (13.2 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.
Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.
TOUCH SCREEN CONTROLS
Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.
During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.
DOOR INTERLOCK SYSTEM
Protects the operator from injury as the beater will not operate without the dispensing door in place.
A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.
Two, 1.0 HP.
One, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)
Minimum 3” (76 mm) around all sides. Minimum air clearances must be met to assure adequate airflow for optimum performance. Optional air discharge chute directs heated air exhaust upwards. No clearance required on right side if air discharge chute is used.
Net: 465 lbs. (210.9 kgs.)
Crated: 505 lbs. (229.0 kgs.)
Volume: 35 cu. ft. (0.99 cu. m)
Width: 23-5/16” (592.1 mm)
Depth: 37-15/16” (963.4 mm)
Height: 36-¼” (920.6 mm)
We Also Recommend