Cart 0

2001 TAYLOR 490 SERIAL K1063395 3PH AIR

  • $ 1,90000

2001 Taylor 490 Milkshake Shake Frozen Beverage Machine

Serial K1063395

Three Phase Air Cooled

Note: Machine is in good condition. Taylor 490 is in good condition both inside and out. Barrel freezes and hopper refrigerates well. Our in house technicians have inspected both exterior and interior components and all necessary repairs have been done to the machine. If you have any questions about this machine in particular or have a particular machine you are looking for feel free to call us at 352-262-9627. We also purchase and accept trade-ins and please call anytime for references as well.

2.5% discount on all purchases paid via wire transfer, cashier's check, or cash.
Payment by credit card is subject to additional paperwork. There will be a four day hold on all credit card and cashier's check purchases.

Crating will be $125 and is mandatory. You will pay shipper directly for commercial freight. Please call 352-262-9627 for freight estimates.

Please check our Policies Page for more info on warranty and shipping.



Freezing Cylinder

One, 7 quart (6.6 liter). 

Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix below 41ºF (5ºC). 

Indicator Lights

Add Mix light alerts the operator to add mix. When the Mix Out light flashes, the unit automatically shuts down to prevent damage.

 Electronic Viscosity Control

The electronic viscosity control continuously measures product viscosity and regulates operation of the refrigeration system.

Beater Motor

One, 0.5 HP

Refrigeration System

One, 7,500 BTU/hr. R404A.

(BTUs may vary depending on compressor used.) 

Air Cooled

Minimum Clearance:  6” (152 mm) on both sides.  It is recommended to place

the rear of the unit against the wall to prevent recirculation of warm air.

Minimum air clearances must be met to assure adequate air flow for optimum



Net: 280 lbs. (127.1 kgs.)

Crated: 317 lbs. (143.8 kgs.)

Volume: 17.3 cu. ft. (.49 cu. m.)  


Width: 18-7/16” (468 mm)

Depth: 31” (787 mm)

Height: 36-⅜” (924 mm)

Counter Clearance 4-¼” (108 mm)

If you need more Taylor 490 machine info, please check out our Machine Support Page and Youtube Machine Tutorials.

We Also Recommend