2023 Frosty Factory 215F
$5,995.00New MSRP: $11,204.00
Serial #: M3012337
Power: 1-Phase (220V)
Cooling: Air Cooled
1 in stock
Machine Prep & Inspection
- Machines & Equipment Ship FREE (Contiguous U.S.)
- Parts & Supplies Ship Free $200+
Description
Frosty Factory 215F Frozen Beverage Machine
Two Flavor | Slush & Frozen Cocktails | Air-Cooled | Floor Model
***This machine is still in the factory packaging and has never been used!***
The Frosty Factory 215F is a high-volume, dual-flavor frozen beverage floor machine built for bars, restaurants, entertainment venues, and concession operations that need serious output and plug-and-play simplicity. Two 12-quart hoppers and two 7-quart freezing cylinders enable simultaneous dual-flavor operation, and an 8-ounce drink dispenses in just 20 seconds — fast enough to keep any line moving. Running on standard 115V, 60Hz, single-phase electrical supply, installation is straightforward for most commercial setups — no special electrical service, no plumber, no complicated setup. Roll it in, plug it in, and start selling.
Key Features
- Two Flavor Simultaneous Output – Two independent 7-Qt freezing cylinders and 12-Qt hoppers allow both flavors to run simultaneously — up to 155 ten-ounce drinks per side, per hour
- 15-Minute Freeze-Down – Goes from liquid mix to perfectly frozen product in approximately 15 minutes — fast startup, minimal wait time between batches
- Exclusive Torque-Sensing Consistency Control – Frosty Factory’s proprietary torque-sensing mechanism ensures consistent texture and thickness in every cup — factory-preset and easily adjustable clockwise for thicker or counter-clockwise for thinner
- 110-Oz Single-Draw Recovery – Handles up to 110 oz. in a single draw and recovers in as little as 4 minutes — built for the pace of a busy rush
- Standby Switch – Refrigerates mix overnight without freezing it down — saves startup time and protects mix quality between service periods
- Lighted Flavor Sign – Built-in backlit sign draws customer attention and promotes your frozen beverage program from across the room
- Self-Contained & Mobile – Air-cooled, self-contained design on 6-inch locking casters — easy to position, reposition, or move between locations
- NSF Certified, Stainless Steel Construction – Built for commercial foodservice sanitation standards with a durable, easy-to-clean stainless finish
Best Fit For
- Bars, restaurants, and entertainment venues where frozen cocktails, margaritas, and slushies are high-margin menu staples
- Concession stands, stadiums, and event venues that need fast, high-volume frozen drink output
- Operators who want a simple, plug-and-play floor model without 3-phase power or water hookup requirements
- Locations running two signature frozen beverages simultaneously with minimal operator attention
Confirm Before Buying
- Requires 230V single-phase electrical service — confirm your location has a compatible 230V outlet before purchasing; this is not a standard 115V plug-in machine
- Air-cooled — confirm adequate ventilation clearance at the installation location
- This is a frozen beverage and slush machine — it is not a soft serve machine and does not produce soft serve product
- Unit dimensions are 25″ W × 31″ D × 56″ H and weighs 430 lbs — confirm floor space and access before purchasing
Why Buy From Slices
This Frosty Factory 215F is brand new, never used, and still in original factory packaging — an open-box unit that offers new-machine confidence at a meaningfully lower price than buying through a standard distributor. Slices Concession is one of the nation’s largest dealers of commercial frozen dessert and frozen beverage equipment, and our team is here to help you confirm fit, answer questions, and support you after the sale.
Not sure if the 215F is the right fit for your beverage program? Contact Slices Concession before you buy — we’ll help you get it right.
Specifications
| Model | 215F |
|---|---|
| Power Type | 1-Phase (220V) |
| Cooling Type | Air Cooled |
| Year | 2023 |
| Installation | Floor |
| Barrel Capacity (Qt) | 2, 7 |
| Hopper Capacity | 12 quart, Two |
| Voltage | 208-230V |
| Width (in) | 25 |
| Depth (in) | 31 |
| Height (in) | 56 |
| Weight (lbs) | 415 |
| Certifications | NSF |
| Condition | Open Box |
Comprehensive 30/90-Day Warranty
We stand behind the quality and performance of our Slices Certified™ machines. Purchase with confidence, knowing that your investment is protected with our industry-leading warranties.
Guaranteed Performance Upon Arrival
We guarantee your machine will be in working condition upon arrival. If it isn’t, we will cover the costs to repair it. Please note that this guarantee applies only to machines that have been properly installed by a qualified professional. Damage resulting from improper installation is not covered under this guarantee.
30-Day Parts and Labor Warranty
For the first 30 days from the date of delivery, we provide a full parts and labor warranty. If your machine experiences any issues, we will cover the cost of parts and labor to get it back up and running quickly.
90-Day Parts Warranty on Motors and Compressors
In addition to our 30-day comprehensive warranty, we offer a 90-day parts warranty specifically for the motors and compressors. Should these critical components fail within the first 90 days, we will supply the necessary parts at no cost to you.
How to Claim Your Warranty
If you experience any issues with your machine, please contact our customer support team. We will guide you through the process to ensure your machine is repaired swiftly and efficiently.
- Contact Us: Reach out to our support team at [email protected] or (800) 660-8646.
- Provide Details: Share the specifics of the issue, including any relevant photos or videos.
- Assessment: You’ll speak directly with our technician to help assess the problem, troubleshoot it, or determine the necessary repairs.
- Repair: We will arrange for the required parts and labor to resolve the issue promptly.
Our Commitment
We are committed to providing high-quality equipment and exceptional customer service. Our warranty is a testament to our confidence in the machines we sell and our dedication to your satisfaction. Purchase with peace of mind, knowing that we’ve got you covered.
Payment & Shipping Details
Accepted Payment Options
We accept ACH, wire transfers, and credit cards (please note a 3% fee applies to credit card payments). Financing is also available through our third-party partners—ask us for details.
Shipping Details
Free Shipping for Machines & Equipment in the Contiguous U.S.
Machines and equipment are professionally crated and shipped for free within the contiguous U.S. Orders typically take 2–4 weeks to prep for shipment. We’ll coordinate with you to schedule the best shipping method and delivery window.
Parts & Supplies
- Free Shipping on orders over $200
- $15 Flat Rate on orders under $200
Shipping Outside the Contiguous U.S.
For locations outside the contiguous U.S.—including Alaska, Hawaii, and international destinations—professional crating is included for free, but shipping costs are not included in the purchase price. Please contact us for a custom quote. We will work closely with you to find the most cost-effective shipping options.
Delivery Process
Our shipping partner will provide tracking information and expected delivery dates once your order is on its way. Please ensure someone is available at the delivery location to receive and inspect the machine upon arrival.
Important Notes
- Inspection: Carefully inspect your machine upon delivery. Any damage or issues must be reported immediately to both the shipping company and our customer service team.
- Installation: Machines must be installed by a qualified professional to ensure proper operation and maintain warranty coverage.
- Timing & Coordination: We strive to coordinate each shipment to arrive promptly and safely according to your needs.
If you have any questions or need a detailed shipping quote—especially for orders outside the contiguous U.S.—please contact us. We’re here to help!
